Personal Statement Template » October 23, 2018

Daily Archives: October 23, 2018

Industrial Services

How To Finish A Concrete Floor?

Published by:

So, you’ve laid down the slab but you’re not quite sure as to what’s next. When building a home or an industrial building most people rely entirely on the construction team to do what’s right, completely unaware of the process of placing and finishing a floor. Construction cannot move upwards until workers are finished with the horizontal concrete plane, so here’s how it’s done.

Preparing the area

The area will be surveyed to ensure that any trees or bushes will not leave any voids in the subgrade (the material underneath the construction or the slab). The subgrade will also be inspected to ensure that it is capable of providing sufficient support to the slab. Be it your driveway or grassland, but the area in which the work will be done will be cleared of any plants or debris.

The slab

After setting the forms (usually wooden) of the slab which allows you to form the area in which the slab will be placed, it is important that you install any rough-in plumbing (for example, bathtub drainpipes) or electrical wiring, following which the slab will be filled with a certified line marking services in Sydney. Then place the relevant waterproof membrane that will ensure that the subgrade does not dry out.

Pouring the concrete should begin from a corner. The excess concrete will then be removed to make sure that the top surface is of the required grade, in a process known as screeding. If any voids, in the form of holes or dents, are left behind after screeding, they should be filled with cement. Then, let the concrete to set. Next, in a process known as floating, all the irregularities on the concrete surface will be removed with a wooden float. Again, any voids are filled with concrete to produce an even and consistent surface. industrial concrete cleaning in Sydney the floor will then clean the surface of the floor thoroughly. Steps that are necessary if any sealers or curing compounds are to be applied.

Care and maintenance

While it’s important to know how a concrete floor is prepared, it’s just as important to know how to take care of one. Concrete floors stain easily, therefore it is important to clean any spills immediately. It’s important to follow the instructions left to you by your contractor on how to maintain your concrete floors and which cleaning solutions to use on them. In order to reduce wear and tear, especially in areas that are frequently used, a mat or a rug might be useful. To ensure that it maintains its luster for years, it is important to frequently clean using the right routine and products.